Helpful Posts Helpful Posts:  0
Results 1 to 4 of 4

Thread: Baby, We Can't Get Much Higher!

  1. #1
    FrankMi's Avatar
    Join Date
    May 2011
    Location
    Fort Mill, South Carolina, USA
    Posts
    6,294
    Real Name
    Frank Miller

    Baby, We Can't Get Much Higher!

    Experimenting with the Noise Reduction in ACR to see if I need a stand-alone NR application. This was a cropped image that had a fair amount of noise in it.

    Baby, We Can't Get Much Higher!

    Somehow got a duplicate and can't delete it!
    Last edited by FrankMi; 4th December 2011 at 08:09 PM. Reason: Still trying to delete the duplicate.

  2. #2
    epmi314's Avatar
    Join Date
    May 2011
    Location
    Ann Arbor, MI
    Posts
    471
    Real Name
    Scott Benz

    Re: Baby, We Can't Get Much Higher!

    Frank,

    Without the original it is hard to tell just how well it worked but the result looks quite good to me.

  3. #3
    FrankMi's Avatar
    Join Date
    May 2011
    Location
    Fort Mill, South Carolina, USA
    Posts
    6,294
    Real Name
    Frank Miller

    Re: Baby, We Can't Get Much Higher!

    Quote Originally Posted by epmi314 View Post
    Frank,

    Without the original it is hard to tell just how well it worked but the result looks quite good to me.
    Here is the image before trying ACR Noise Reduction on the JPG after post processing. This was about a 1/3 crop from the SOOC. You can see a fair amount of speckles. particularly in the log, which was almost black in the SOOC image.

    Baby, We Can't Get Much Higher!

    You might need to open them in lightbox to clearly see the difference. Thank you for looking!

  4. #4

    Join Date
    Aug 2009
    Posts
    2,342
    Real Name
    Steve

    Re: Baby, We Can't Get Much Higher!

    I can see a significant amount of detail loss. Perhaps you went a little too far.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •