Understanding brightness and gamma

pretty much all photo editing SW have brightness/gamma adjustment..
however, I am still struggling to understand what Gamma is. and what gamma correction will do.

Cheers
vincent

I probably don't know more than you do...but I will tell how I think about it......

I normally think of Gamma and Brightness being some what the same....I do understand that changing Gamma does also change the color channels ..... but

http://i175.photobucket.com/albums/w...goss/Comb2.jpg

A sample (Test Image mapped to Pallet) shows somewhat the same results whether increasing brightness or increasing Gamma using levels.....I think of Gamma as the middle value in the histogram or average value

Now someone, with more technical competence, can correct my understanding and we both can learn something...

Here are a couple of interesting links with more information than most of us care about, but with the correct terminology and explanations:
http://www.poynton.com/notes/colour_.../GammaFAQ.html
http://www.poynton.com/notes/colour_.../ColorFAQ.html

It's a long time since I took my physics and engineering courses, but I'll try to summarize my understanding.

The way colour is perceived by any receiver (whether the eye, film, digital sensor, monitor screen etc.) varies with the wavelength (colour) and the intensity (brightness) of the light. Simply, different materials respond to different light in different ways. Gamma is an expression of this different response.

The relationship between the original light and the recorded voltage on the camera sensor, or between the voltage on the computer monitor signal and the chemicals that create the visible light, for example, is refered to as the "gamma". Gamma adjustment is a correction to make the final image appear the same as the original, despite the non-linear characteristics of the technology used.

What does this mean to my pictures? Another website has an interesting quote: "Setting the Gamma of an image is one way of adjusting the relative proportions of bright and dark areas – much the same way as in the midtones example"
http://www.northlight-images.co.uk/t...ial_gamma.html

So, while adjusting brightness and gamma may produce similar results in most circumstances, gamma is actually changing the relative brightness along a curve between dark and white, whereas brightness changes the value uniformly (and thus introduces its own perceptual gamma correction).

I hope that helps a little, and has not just confused you more!:D

Yes this is fun...I did look at a lot of reference material...much of it is like my engineering references....they give guidance but not used very much.....I should have included an actual set of histograms......

http://i175.photobucket.com/albums/w...lgoss/Comb.jpg

In my case I am only interested to what happens to my image.....perhaps at some time within color management work.......I do note differences in how the Levels, middle or Gamma adjustment, gives different results when using different Graphics programs.

But the question was not mine....I just played around having a little fun..proving nothing...but I will explore further your (SRH) references....

Follow-Up....The test were based on the Gimp Levels control.....It occurred that the control may simply use brightness in adjusting the Gamma or Midpoint setting....therefore...
I tested the same on Paint Shop Pro X2 and the results were different....so I moved on to the Filters Unlimited Plugin which has both Brightness and Gamma adjustment effects......I ran this on both programs and for sure I got different results from the Gimp Levels.....

I note that in increasing Gamma I saw little change in contrast...retaining shadows...while increasing brightness lost contrast....so I now know it doesn't matter in Gimp when I use Levels as it is the same as Brightness.... but using a Gamma only correction, such as in PSPP or FU will better retain Contrast (slightly).

Another way to look at it is that brightness moves the entire histogram left or right (without compressing or stretching tones, regardless of any resulting shadow/highlight clipping), whereas gamma adjustment just redistributes the histogram within a given tonal range (so that it actually compresses highlights to bring out the shadows, or vice versa, without introducing any clipping in either the highlights or the shadows). If you were using the levels tool, changing the brightness would be equivalent to moving the white and black points left or right by an equal amount (so as not to affect the relative tonal relations in between). Similarly, for gamma this is equivalent to moving the midtone slider left or right.

Thanks McQ.......

I summarized as follows.....

http://i175.photobucket.com/albums/w...st-Summary.jpg

Quote:

---

But the question was not mine

---

damn, I hate when that happened...people answering questions with details analysis, examples, etc...and then they hijack the thread!....:D

Thanks all for the good feedback (which I still have to look through)...I think I understand now what both adjustments do.

following the link that SRH posted, I also found he has a pdf on setting monitor brightness/contrast on monitor and the diagram summarize what McQ basically said in term of moving the histogram one way or another..

http://www.poynton.com/PDFs/Brightness_and_Contrast.pdf

Thanks for that find, atvinnys. I was inspired to surf Poynton's site some more, and came across
http://www.poynton.com/PDFs/Rehabilitation_of_gamma.pdf
Most of Poynnton's work is related to computer hardware, but his principles apply to all imaging systems. I found the following excerpt interesting.

"JPEG and other lossy image compression algorithms depend on
discarding information that won’t be perceived. It is vital that the data
presented to a JPEG compressor be coded in a perceptually-uniform
manner, so that the discarded information has minimal perceptual
impact. In practice, JPEG works well only on nonlinearly-coded
(gamma-corrected) image data."

Now I'm wondering how my E3 handles gamma prior to creating a JPEG? (Actually, I'm quite happy with the camera conversion.)

After reading all these posts, and viewing a whole bunch of stuff on the web, I finally decided to look at the help file in PhotoShopElements6.:o In the glossary: gamma adjustment--The contrast resulting from darkening or lightening the midtones of an image. When you adjust the gamma, you change the brightness of the midtones without substantially affecting the highlights and shadows.

This is pretty much what you said originally, willgoss.:)

To those familiar with curves, it can be very clarifying to see how Photoshop tools work in terms of an input/output curve.

I have calculated these curves after applying the referred Photoshop option to a test image containing all possible input levels and looking at the corresponding output values produced. First two are gamma and bright:

Standard Gamma 2.2
http://backup.cambridgeincolour.com/...2tifcurgb5.gif

Bright +40
http://backup.cambridgeincolour.com/...o40tifcfi9.gif

Contrast +40
http://backup.cambridgeincolour.com/...aste40tfw1.gif

Levels adjustment tool
http://backup.cambridgeincolour.com/...ntifcurru1.gif

Lights & Shadows adjustment 70%
http://backup.cambridgeincolour.com/...100tifctz6.gif

Exposure +2
http://backup.cambridgeincolour.com/...icion2ttj8.gif

It is easy to see how absolutely not recommended is Photoshop's contrast tool to control contrast in our photographs since it clips both shadows and highlights. A 'S' shaped curve is much preferred.

(Correction): In the Exposure control, the apparent non-linearity near 0 is due to the sRGB non-pure gamma near 0.

Best regards.

wow, that's some good analysis.
thanks a bunch.

Thank you _GUI_ .
That's just what i needed for a better understanding.

_GUI_,

I've seen this illustrated before, but I've never seen it confirmed by analysis. Nice work!

Regards,
Mike